colored cards
modern luxurious house
big house with car garage
front elevation of beautiful home lit up at twilight
front elevation of beautiful home lit up at twilight
How to program Harley Davidson motorcycles to a garage door opener?
**Home Link is working with Harley Davidson and in the future hopes to have Home Link available on Harley Davidson Motorcycles**.  Currently, there is an external Harley Davidson receiver that wires directly into the back of the garage door opener motor and a Harley Davidson transmitter that has to be...
linear opener dallas tx
Programming Linear garage door opener Limit and Force
Adjustments To program the travel and force limits on Linear garage door openers you will need to locate the plastic adjustment screws on the side or back of the opener motor. Setting Open and Close Limits 1. Start with the garage door in the closed position. Make sure the trolley...
skylin garage opener limitset
Programming Skylink Travel and Force Limits IQ/EQ Series
(IQ Series) Programming Travel Limits 1. Press and hold the “PROG” button for about 10 seconds to enter the programming mode. These controls are located on the back of the opener motor. 2. The”PROG” button and the Up Arrow indicator light will be on. 3. Using the “Up Arrow” open...
garage door opener overheaddoor limit adjustment
Programming Travel and Force Limits Overhead Legacy and Phantom
Garage Door Openers Before programming the travel limits and force limits make sure the door is attached to the trolley and the trolley is attached to the inner-slider. Programming “Open” Limit 1. On the back of the opener motor locate the limit set button. 2. Press and hold the limit...
guardian limit and force adjustment
Programming Guardian Travel and Force Limits
Programming the Up Travel Limit 1. Start with the garage door closed and make sure the trolley is attached to the garage door 2. Press the “Limit” button one time. The “Up” green light will be on. 3. Press and hold the “Up” button until the garage door is at...
front elevation of beautiful home lit up at twilight
Programming and setting Genie garage door opener limits
Type 1  Programming Genie IntelliG, TriloG, GPower and RelaiG 850/650 Models Travel and Force Limits You will need to locate the Program button and the Down (-) button and Up (+) buttons located in the bottom of the Genie garage door opener. Setting the Down/Closed Limits 1. Start with the garage...
front elevation of beautiful home lit up at twilight
Programming the Marantec M3-631 Keyless/Keypad
1. On the Marantec M3-631 Keypad, open the terminal area and using the programming connector, connect the keypad to a programmed handheld remote. 2. On the handheld remote, press and hold the transmitter button you use to open and close the 3. On the keypad press the “enter” button while...
front elevation of beautiful home lit up at twilight
Chamberlain/Liftmaster Travel Limit and Force Limit Adjustment
First Type – Chamberlain & Liftmaster Security 2.0+ Technology (Up and Down Arrow Buttons) The program buttons are located on the back of the opener, you may need to open the lens cover for the light to locate these controls. 1. Start with the garage door in the down/closed position....
front elevation of beautiful home lit up at twilight
Programming the Viper X50 and X70
The Viper Series garage door openers are made by Marantec in Germany and assembled in the United The Steps Listed Below are for the Initial Set Up of the System 1. On the opener locate the control panel and press and hold the “P” button for 2-10 seconds. The number...
garage door wireless keypad linear program
Programming Linear MDTK Wireless Keypad
Locate the learn button on the back or side of the Linear Opener. Press the learn button on the Linear opener. The learn light will come on. On the Linear MDTK keypad enter a 1-6 digit code you want to use to open/close the garage door. The light on the...

Get Your Free in Home Estimate

Fill your details and a representative will get back to you shortly.