How to Program LiftMaster MyQ 828LM Device to LiftMAster, Chamberlain, Craftsman and Raynor Garage Door Opener?

MyQ technology (Chamberlain model: CIGBU) is an additional feature to enable smartphones, tablets, Laptop and PC to remotely operate your garage door opener. The feature was added at the end of 2011 when the Chamberlain Group released it’s new Security 2.0+ openers.

Steps:

1. Make sure your opener is compatible with myQ 828LM device – You will have the MyQ logo on the opener and the yellow learn button.

LiftMaster         Chamberlain         Raynor  

2. Plug your MyQ internet gateway into a LAN port (modem or router ) – 

The blue and green will flash a few times, the blue light goes out and the green light stays solid.

 3. Go to https://www.myliftmaster.com/

4. Sign Up for a new account with Liftmaster and register your internet gateway to your LiftMaster account. The 10 charactes serial number is in the back of the device.

 The device can only be registered to one account and can’t be re-registered. You can log in from multiple devices and register as many openers as you want.

5. Create a Place in the account and name it (Home, Office, Vacation house, etc.) .

6. Click on settings and go to add a garage door opener

7. On your garage door opener, press on the yellow learn button and the light comes on and stay solid.

8. Wifi capability – click no (Unless you have a built-in Wifi like the 8550W)

9. Click add device opener – lights blink 5 times

10. Create a name for the new register garage door opener

11. Open and close the door from your smart phone &     MyQ shows garage door status

13. You can register as many as you want garage door openers to one MyQ device

14. Down load the LiftMAster app form Apple Itunes or Google Play and login

in you your account. You can now control you opener from your mobile device.

Set up an alert when you door gets open or close.

*Steps 3 – 13 can be done on your mobile or tablet device.

Note – The LM828 MyQ is an equivalant to the

Chamberlain Internet Gateway (Model: CIGBU)

Installation and programing Cost –

DIY = $60+ for the device and up to one or two hours of your time.

Proffessional Garage Door – $140 – $180 installed & Programmed.

Supported Models for the instruction above.

LiftMaster Garage Door Openers

Chain Drive

8065, 8165, 8360, 8365-267

Belt Drive

8155, 8355, 8550, 8557, 8587

Wall Mount

8500

Chamberlain Garage Door Openers

Belt Drive

HD750WF, HD950WF, HD520EV, WD962KEV, WD832KEV, LW3500, WD962KPEV, WD962MLEV, LW5000EV

Chain Drive

PD612EV, PD752KEV, HD420EV, PD762EV

Raynor Garage Door Openers

Ultra II, Admiral II, Prodigy II