Search
Close this search box.
colored cards
modern luxurious house
big house with car garage
front elevation of beautiful home lit up at twilight

Programming Linear MDTK Wireless Keypad

  1. Locate the learn button on the back or side of the Linear Opener.
  2. Press the learn button on the Linear opener. The learn light will come on.
  3. On the Linear MDTK keypad enter a 1-6 digit code you want to use to open/close the garage door.linear-garage-door-opener-learn-button
  4. The light on the opener will flash when the keypad code is learned/accepted.
  5. Testing the keypad, on the keypad enter the 1-6 digit code you chose and then press the start/stop button on the keypad. The door should open and close.
  6. Repeat the listed steps for each additional code for this keypad.

linear-opener-new-keypad-installation

The MDTK Wireless Keypad can also be programmed to the MDR, MDR-2, MDRG and SMDGR external receivers.

  1. On the keypad enter a 1-6 digit code you want to use to open/close your garage door.
  2. Within 20 seconds on the receiver press programming button 1 or 2.
  3. The LED light on the receiver will come on for 5 seconds if there is room in the receiver memory.
  4. On the keypad press the start/stop button within 5 seconds.
  5. The LED light on the receiver will flash when the transmitter is received.
  6. Testing the keypad, on the keypad enter the 1-6 digit code you chose and then press the start/stop button on the keypad. The door should open and close.

 

If you require assistance, don’t hesitate to contact us- Garage door repair Fort Worth TX

3/5 - (62 votes)

Get Your Free in Home Estimate

Fill your details and a representative will get back to you shortly.