How to program Genie 34967R Wireless Keypad

Home » DIY » How to program Genie 34967R Wireless Keypad

Programming the Wireless Keypad

1. Open the cover for the wireless keypad fully. (Keypad indicator flashes once and goes off)

2. On the keypad press in order 3-5-7.

3. On the keypad press the Program button. (Keypad indicator flashes 1 time per second)

4. On the keypad enter PIN (3-8 digits)

5. On the keypad press the Program button. (Keypad indicator flashes 2 times per second)

6. Close keypad cover completely.

Programming 1 Door Opener

1. Locate Learn Code Button and Light on opener unit.

2. Press Learn Code Button on opener. (Learn code light on opener should flash)

3. On keypad enter PIN.

4. On keypad press send. (Learn Code light on opener stays on)

5. On keypad press send a second time. (Learn Code light on opener turns off)

6. On keypad press send a third time. (The opener motor should start to run)

7. On keypad press send a fourth time. (The opener motor should stop)

Testing and Using the Wireless Keypad

1. Open the wireless keypad cover, wait for the keypad indicator light to go out before pressing

any buttons.

2. Enter the PIN.

3. Press and hold send button. When the door begins to move release the send button.

4. Close keypad cover completely.

Programming Multiple Door Openers (Up to 3)

1. Locate Learn Code Button and Light on opener unit.

2. Press Learn Code Button on opener. (Learn Code light on opener should flash)

3. On keypad enter PIN.

4. On keypad press send.

5. On keypad enter door number 1, 2 or 3. (Learn Code light stays on)

6. On keypad press send a second time. (Learn Code light goes off)

7. On the keypad press send a third time. (Opener motor starts to run)

8. On the keypad press send a fourth time. (The motor stops)

9. Close the keypad cover completely.

10. Repeat the listed steps for each garage door opener to be programmed.

Testing and Using the Keypad for Multiple Garage Doors

1. Open the keypad cover and wait for the indicator light to go off before pressing any buttons.

2. On the keypad enter the PIN.

3. On the keypad press Send.

4. On the keypad enter the door number 1, 2 or 3 you want to open or close. (The selected door

should open/close)

5. Close the keypad cover completely.

5/5 - (1 vote)

Request Your Quote Today.

Business Hours and General Information

Business Hours

Available 7 Days a week. Mon – Sat 7am-9pm. Sun – 8am-8pm.

Houston

Houston, TX Location: 17300 El Camino Real ste 110f, 77058, TX

Houston, TX Location: 5750 Royalton Street #C, 77081, TX

Houston, TX Location: 7050 Lakeview Haven Dr #136,, 77095, TX

Conroe, TX Location: 1506 FM 2854 Rd Ste 116, 77304, TX

Humble, TX Location: 1906 Treble Dr #4, 77338, TX

New Caney, TX Location: 23010 Gabriel Drive Ste 101, 77357, TX

The Woodlands, TX Location: 25511 Budde Rd Ste 3604-B, 77380, TX

Cypress, TX Location: 17920 Huffmeister Rd Ste 310 C, 77429, TX

Katy, TX Location: 22503 Katy Fwy #67, 77450, TX

Sugar Land, TX Location: 9718 Gaines Rd ste 22, 77498, TX

Pasadena, TX Location: 3222 Burke Rd Suite 211G, 77504, TX

Baytown, TX Location: 1009 Polly St ste 10, 77520, TX

Channelview, TX Location: 16023 E Freeway Service Rd Suite 17, 77530, TX

Pearland, TX Location: 4806 W Walnut St Suite 200, 77584, TX

Texas City, TX Location: 3201 Palmer Hwy Ste 103, 77590, TX

Dallas Fort Worfh

Azle, TX Location: 14545 Farm to Market Rd 730 N Suite 101, 76020, TX

Burleson, TX Location: 44 SW Wilshire Blvd Ste I-106, Burleson, 76028, TX

Carrollton, TX Location: 2225 E Belt Line Rd #301-E, 75006, TX

Cleburne, TX Location: 1 N Walnut St Ste 6, 76033, TX

Dallas, TX Location: 2821 McKinney Avenue, 75204, TX

Denton, TX Location: 525 Fort Worth Drive, 76201, TX

DeSoto, TX Location: 215 Dalton Drive, 75115, TX

Flower Mound, TX Location: 1033 Long Prairie Road #6A, 75022, TX

Benbrook, TX Location: 3442 Williams Road, 76116, TX

Frisco, TX Location: 110 Rose Ln Suite 207, 75034, TX

Garland, TX Location: 629 W Centerville Rd #211A, Garland, 75041, TX

Grand Prairie, TX Location: 1205 West Carrier Parkway #205, 75050, TX

Keller, TX Location: 204 S Main St Ste 105, 76248, TX

Mansfield, TX Location: 2363 U.S. 287 Frontage Rd #210, 76063, TX

McKinney, TX Location: 503 N Kentucky St APT 10, 75069, TX

Plano, TX Location: 3415 Custer Rd #103, 75023, TX

Rockwall, TX Location: 4480 I-30 Ste 300, 75087, TX

Waxahachie, TX Location: 1014 Ferris Ave Ste 108-A, 75165, TX

Wylie, TX Location: 405 Williams St Ste A, 75098, TX

Available 7 Days a week.
Mon – Sat 7am-9pm.
Sun – 8am-8pm.

Grand Prairie TX Location:
1209 West Carrier Parkway #306
Grand Prairie, TX, 75050

Fort Worth TX Location:

1137 Burton Hill Rd Suite F, Fort Worth, TX 76114

Garland TX Location:
629 W Centerville Rd Unit 211A
Garland, TX, 75041

Denton TX Location:
525 Fort Worth Dr Unit 208
Denton, TX, 76201

McKinney TX Location:
503 North Kentucky Street Unit 10
McKinney, TX, 75069

Frisco TX Location:
110 Rose Ln Unit 207
Frisco, TX, 75034

DeSoto TX Location:
215 Dalton Drive Ste C-3
DeSoto, TX, 75115

Dallas TX Location:
2821 McKinney Ave #4
Dallas, TX, 75204

Keller TX Location:
204 South Main Street Ste 105
Keller, TX, 76248

Plano TX Location:
3415 Custer Rd #103
Plano, TX, 75023

Wylie TX Location:
405 Williams St Ste A
Wylie, TX, 75098

Waxahachie TX Location:
1014 Ferris Ave Ste 108-A
Waxahachie, TX, 75165

Burleson TX Location:
344 SW Wilshire Blvd Ste I-106, Burleson, TX, 76028

Azle TX Location:
14545 FM 730 N Suite 101, Azle, TX 76020

Carrollton TX Location:
2225 E Belt Line Rd 301-E, Carrollton, TX 75006

Flower Mound TX Location: 1033 Long Prairie Rd #6A, Flower Mound, TX 75022

Social Media

Dallas Texas, Plano TX, Garland TX, Highland Village, Lakewood, Las Colinas, Lewisville, Little Elm, Grapevine, Haltom City, Hurst, Keller, Forney, Carrollton, McKinney TX, Murphy Texas, Oak Lawn, Arlington TX, Parker TX, Plano, Preston Hollow, Richardson TX, Denton, Addison, Allen, Bedford, Coppell, Crowley, DeSoto, Euless, Flower Mound, Rockwall Texas, Garland Texas, Rowlett TX, Sachse TX, The Colony TX, Lavon Texas, Fort Worth TX, East Dallas, North Dallas, Wylie TX, White Rock Lake, area Lakewood, North Richland Hills TX, Benbrook, Burleson, Frisco TX, Waxahachie, Red Oak, Irving TX, Mesquite TX, Azle TX

Get Your Free in Home Estimate

Fill your details and a representative will get back to you shortly.

How to program Genie 34967R Wireless Keypad

Programming the Wireless Keypad

1. Open the cover for the wireless keypad fully. (Keypad indicator flashes once and goes off)

2. On the keypad press in order 3-5-7.

3. On the keypad press the Program button. (Keypad indicator flashes 1 time per second)

4. On the keypad enter PIN (3-8 digits)

5. On the keypad press the Program button. (Keypad indicator flashes 2 times per second)

6. Close keypad cover completely.

Programming 1 Door Opener

1. Locate Learn Code Button and Light on opener unit.

2. Press Learn Code Button on opener. (Learn code light on opener should flash)

3. On keypad enter PIN.

4. On keypad press send. (Learn Code light on opener stays on)

5. On keypad press send a second time. (Learn Code light on opener turns off)

6. On keypad press send a third time. (The opener motor should start to run)

7. On keypad press send a fourth time. (The opener motor should stop)

Testing and Using the Wireless Keypad

1. Open the wireless keypad cover, wait for the keypad indicator light to go out before pressing

any buttons.

2. Enter the PIN.

3. Press and hold send button. When the door begins to move release the send button.

4. Close keypad cover completely.

Programming Multiple Door Openers (Up to 3)

1. Locate Learn Code Button and Light on opener unit.

2. Press Learn Code Button on opener. (Learn Code light on opener should flash)

3. On keypad enter PIN.

4. On keypad press send.

5. On keypad enter door number 1, 2 or 3. (Learn Code light stays on)

6. On keypad press send a second time. (Learn Code light goes off)

7. On the keypad press send a third time. (Opener motor starts to run)

8. On the keypad press send a fourth time. (The motor stops)

9. Close the keypad cover completely.

10. Repeat the listed steps for each garage door opener to be programmed.

Testing and Using the Keypad for Multiple Garage Doors

1. Open the keypad cover and wait for the indicator light to go off before pressing any buttons.

2. On the keypad enter the PIN.

3. On the keypad press Send.

4. On the keypad enter the door number 1, 2 or 3 you want to open or close. (The selected door

should open/close)

5. Close the keypad cover completely.

Fill Out The Form

Recent Post

Request Your Quote Today.

Business Hours and General Information

Recent Posts

Social Media

Get Your Free in Home Estimate